Part 1: Unboxing Anker Nano Car Mount 2 × Wet Wipes and 2 × Hook-and-Loop Strips Magnetic Installation Kit Safety Sheet Anker Nano Car Mount 2 × Hook-and-Loop Strips Magnetic Installation Kit Safety Sheet 2 × Wet Wipes Part 2: Assembling the Car Mount Place on a smooth dashboard surface that doesn't block your view. Clean the area thoroughly with the provided wet wipes and allow it to dry completely. Remove the protective film from the hook-and-loop strip. Press firmly across the entire hook-and-loop strip surface for 1 minute to ensure strong adhesion. Wait 48 hours before using. The stickiness of 3M tape will increase 4 times within 48 hours. Attach the car mount to the hook-and-loop strip. Attach the car mount to the hook-and-loop strip. Adjust the magnetic pad to your preferred viewing angle. For iPhone 12-16 Series, MagSafe, and magnetic case users, your car mount is ready. Part 3: For iPhones and Android phones without MagSafe, installing a magnetic ring is necessary. First, thoroughly clean your phone. Use the positioning card to find the center of your phone. Apply the film for additional protection. Remove the protective film from the magnetic ring and attach it precisely to the center of the phone. Your phone is now equipped with a magnetic ring and can be attached to the car mount. Anker Nano Car Mount (Magnetic, Detachable Pad)

视频信息

答案文本 复制

视频字幕 复制

Welcome to the Anker Nano Car Mount unboxing. Inside the package, you'll find the main car mount unit, two wet wipes for cleaning, two hook-and-loop strips for mounting, a magnetic installation kit for non-MagSafe phones, and a safety instruction sheet. Let's examine each component that will help you set up your new car mount. Now let's install the car mount on your dashboard. First, choose a smooth location that won't block your view. Clean the area thoroughly with the provided wet wipes and let it dry completely. Remove the protective film from the hook-and-loop strip, then press it firmly for one full minute. Wait 48 hours for the adhesive to reach full strength - this is crucial for a secure mount. Finally, attach the car mount and adjust it to your preferred viewing angle. Great news for iPhone 12 through 16 series users! Your car mount is now ready to use. These newer iPhones have built-in MagSafe technology that works perfectly with the magnetic mount. Simply bring your phone close to the mount and it will snap into place securely. If you have a MagSafe compatible case or any magnetic case, it will work the same way. No additional setup required! For older iPhones and Android phones without MagSafe, you'll need to install the magnetic ring. Start by thoroughly cleaning the back of your phone. Use the positioning card to find the exact center of your device. You can optionally apply the protective film first. Then remove the protective backing from the magnetic ring and attach it precisely to the center. Press firmly to ensure good adhesion. Your phone is now equipped with magnetic capability and ready to use with the car mount. Congratulations! Your Anker Nano Car Mount setup is now complete. You have a secure magnetic connection that holds your phone firmly in place, with 360-degree rotation capability for the perfect viewing angle. The mount allows for easy one-handed operation, so you can attach and detach your phone safely while driving. Enjoy your hands-free navigation and calls, and drive safely with your new car mount!